 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
Mainsail Feeders & Prefeeders for Boltrope |
||
|
|
||
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
|
Mainsail Feeders & Prefeeders for Boltrope |
||
|
|
||
| Mainsail Prefeeders for Boltrope | ||
|
Mainsail Prefeeders allow for more rapid feeding of Sails with a Boltrope Luff.
Mounted on the forward centerline of the Mast,
they are used for Forestay attachment on Fractional Rigs, and are suitable for use with
appropriately sized secondary Forestays or Staysail Stays. Internal Halyards exit lower on the mast, normally using standard Exit Plates, Exit Blocks or Welded Mast Base Exit Boxes. Listed below are a variety of common Kenyon and Hall Spar Forestay/Jib Boxes. Listed separately are Isomat/Sparcraft Jib Boxes and Z-Spar Jib Boxes. See also: Forestay/Staysail Tangs and Exit Blocks. See also, Tangs Main Page. |
||
|
|
||
|
Jib Boxes for Fractional Rigs |
||
|
Roller Prefeeder: K-11087:
Heavy-duty SS Roller Prefeeder automatically feeds boltrope mainsails into mast. Large diameter rollers eliminate friction and chafe. Supplied with threaded slug and screws to clamp it in luff groove, below sail entrance. Adjust higher or lower until feeding is perfect. Fits any mast section that uses boltrope.
|
|
|
|
|
||
|
Roller Prefeeder: K-11087:
Heavy-duty SS Roller Prefeeder automatically feeds boltrope mainsails into mast. Large diameter rollers eliminate friction and chafe. Supplied with threaded slug and screws to clamp it in luff groove, below sail entrance. Adjust higher or lower until feeding is perfect. Fits any mast section that uses boltrope.
|
|
|
|
|
||
|
Roller Prefeeder: K-11087:
Heavy-duty SS Roller Prefeeder automatically feeds boltrope mainsails into mast. Large diameter rollers eliminate friction and chafe. Supplied with threaded slug and screws to clamp it in luff groove, below sail entrance. Adjust higher or lower until feeding is perfect. Fits any mast section that uses boltrope.
|
|
|
|
|
||
|
Roller Prefeeder: K-11087:
Heavy-duty SS Roller Prefeeder automatically feeds boltrope mainsails into mast. Large diameter rollers eliminate friction and chafe. Supplied with threaded slug and screws to clamp it in luff groove, below sail entrance. Adjust higher or lower until feeding is perfect. Fits any mast section that uses boltrope.
|
|
|
~ Home ~